cenolan.com

RPMs for the Broadcom 802.11 STA Wireless Driver are now available from the rpmfusion.org repos for Fedora 8, 9 and 10.

This is an official-release of Broadcom's IEEE 802.11a/b/g/n hybrid Linux device driver for use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322-based hardware. This driver also supports the incorrectly identified BCM4328 chipset which is actually a BCM4321 or BCM4322 chipset.

Previously I explained how to build the Broadcom STA driver from source but now the installation and updates can all be taken care of using yum and the rpmfusion non-free repository. Just follow these two simple steps:

1) Enable the rpmfusion non-free repository.

The broadcom-wl and wl-kmod RPMs that we need are in the rpmfusion non-free repository. To enable this repo in Fedora simply do this:

su -c 'rpm -ivh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm'

2) Update and install the driver package

Now that you have the appropriate repository enabled, to install the driver package we first ensure that we have the latest updates and then install the "broadcom-wl" package which will bring with it the required "kmod-wl" package:

su -
yum update
yum install broadcom-wl

That's all there is to it. At this stage you may need to reboot in order to enable the new driver and any new kernel that was installed during the update.

When future kernels are released a simple "yum update" command should install the new kernel and also pull in the updated Broadcom driver for that new kernel.

Based on the patches found in this post over at Ubuntu forums I have created an updated synaptics touchpad driver RPM package for Fedora 8 x86_64.

As the original author notes, this makes it more enjoyable to use the touchpad while using the MacBook. It does two things:

1. Adds the option "MultiFingerButton" to synaptics. This allows us to configure the touchpad to right-click and middle-click by placing two or three fingers on the pad and then clicking the button. In my experience this is far more reliable than the "two finger tap" method of right-clicking.
2. It makes the mouse arrow more stable - I have found this to be a HUGE improvement in usability over the stock synaptics driver. With the original driver, if you put two fingers on the mousepad and release only one, the mouse arrow moves. This is the default behaviour in Linux and Windows, but in MacOSX, the mouse arrow stays put, and in my personal opinion, this is a much better behaviour. This patch makes it behave just like MacOSX. This may not sound much, but you'll find it makes a huge difference to the stability and usability of the touchpad.

(more...)

The latest 2.6.25.x Fedora 8 kernels have both ACPI_PROCFS_POWER and ACPI_SYSFS_POWER turned on and this can cause a strange problem with HAL which results in it incorrectly displaying the same battery twice and reporting incorrect charge levels for the "bogus" battery. This in turn creates problems with power management software such as kpowersave and gnome-power-manager.

I have only seen this reported on some specific x86_64 machines but it may affect other architectures too.

(more...)

Banshee 1.0 was released on June 5 2008. At the time of writing I haven't been able to find an official Fedora 8 RPM build so I have built my own using the Fedora 9 source RPM and made it available here for you to download and install.

For those that don't know, Banshee is a great multimedia player for Linux with support for iPod syncing, podcasts, streaming radio, video and lots more. For iPod owners Banshee is one of few viable Linux alternatives to iTunes.

(more...)

Following on from my previous post, I have been making some RPM packages available for Fedora 8 and the MacBook 3,1 Santa Rosa.

The kernel packages are not needed now since Fedora 8 kernel 2.6.24.3-50 (and newer) already contains the MacBook specific fixes. However, at the time of writing the gstreamer packages are still required if you want to use gstreamer based applications with the MacBook iSight camera.

Before downloading, please take care of my bandwidth. If you don't need the package, please don't download it.

You can download the packages here.

There is also this thread at fedoraforum.org which may be helpful.

If you find any problems or have any suggestions please let me know.

The MacBook is great, but OS X is not really my cup of tea and I choose not to use Windows. Luckily Fedora 8 works like a charm on the MacBook and with a bit of configuring you can get all the hardware working properly.

I couldn't find any information on the lazyweb about installing Fedora 8 on a MacBook so I recorded what I did and made a detailed how-to which is posted in the wiki over at mactel-linux.org. The guide shows you step-by-step how to install and configure Fedora 8 x86_64 on the MacBook and works with both MacBook version 3,1 (from late 2007) or version 4,1 (from early 2008).

Big up to the guys at Fedora who gave in to my relentless nagging and integrated some of the mactel-linux patches into the latest Fedora kernels. Without them I'd still be spending my weekends rolling kernels!

If you find the guide useful or have any comments or suggestions then let me know.