1) Enable the rpmfusion repositories.

The broadcom-wl and wl-kmod RPMs that we need are in the rpmfusion non-free repository which also requires the rpmfusion free repository. To enable these repos in Fedora 11 simply do this:

su -c 'rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm'

2) Update and install the driver package

Now that you have the appropriate repository enabled, to install the driver package we first ensure that we have the latest updates and then install the "kmod-wl" package which will bring with it the required "broadcom-wl" package:

su -
yum update
yum install kmod-wl

3) Make a couple of adjustments

At this stage you should reboot and provided you have Network Manager running (default setting for F11) it should detect your Broadcom wireless device and you should be able to connect to your wireless network.

If you're having problems then it is likely some conflict between Network Manager and the network service. To ensure that Network Manager can use the wireless go to System > Administration > Network and select the wireless device (if it's not there then this doesn't apply to you). Edit the device and check "Controlled by Network Manager" and "Activate device when computer starts". Close Network Configuration, save changes and then reboot.

You should also read the license and readme which are located in /usr/share/doc/

4) Enjoy your wireless!

That's all there is to it. At this stage you may need to reboot (if you didn't already) in order to enable the new driver and any new kernel that was installed during the update.

When future kernels are released a simple "yum update" command should install the new kernel and also pull in the updated Broadcom driver for that new kernel.

This is an official-release of Broadcom's IEEE 802.11a/b/g/n hybrid Linux device driver for use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322-based hardware. This driver also supports the incorrectly identified BCM4328 chipset which is actually a BCM4321 or BCM4322 chipset.

Previously I explained how to build the Broadcom STA driver from source but now the installation and updates can all be taken care of using yum and the rpmfusion non-free repository. Just follow these two simple steps:

1) Enable the rpmfusion non-free repository.

The broadcom-wl and wl-kmod RPMs that we need are in the rpmfusion non-free repository which also requires the rpmfusion free repository. To enable these repos in Fedora simply do this:

su -c 'rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm'

2) Update and install the driver package

Now that you have the appropriate repository enabled, to install the driver package we first ensure that we have the latest updates and then install the "broadcom-wl" package which will bring with it the required "kmod-wl" package:

su -
yum update
yum install broadcom-wl

3) Make a couple of adjustments

At this stage you should reboot and provided you have Network Manager running (default setting for F10) it should detect your Broadcom wireless device and you should be able to connect to your wireless network.

If you're having problems then it is likely some conflict between Network Manager and the network service. To ensure that Network Manager can use the wireless go to System > Administration > Network and select the wireless device (if it's not there then this doesn't apply to you). Edit the device and check "Controlled by Network Manager" and "Activate device when computer starts". Close Network Configuration, save changes and then reboot.

You should also read the license and readme which are located in /usr/share/doc/broadcom-wl-5.10.27.6/

4) Enjoy your wireless!

That's all there is to it. At this stage you may need to reboot (if you didn't already) in order to enable the new driver and any new kernel that was installed during the update.

When future kernels are released a simple "yum update" command should install the new kernel and also pull in the updated Broadcom driver for that new kernel.

As the original author notes, this makes it more enjoyable to use the touchpad while using the MacBook. It does two things:

1. Adds the option "MultiFingerButton" to synaptics. This allows us to configure the touchpad to right-click and middle-click by placing two or three fingers on the pad and then clicking the button. In my experience this is far more reliable than the "two finger tap" method of right-clicking.
2. It makes the mouse arrow more stable - I have found this to be a HUGE improvement in usability over the stock synaptics driver. With the original driver, if you put two fingers on the mousepad and release only one, the mouse arrow moves. This is the default behaviour in Linux and Windows, but in MacOSX, the mouse arrow stays put, and in my personal opinion, this is a much better behaviour. This patch makes it behave just like MacOSX. This may not sound much, but you'll find it makes a huge difference to the stability and usability of the touchpad.

Install the RPM from my Fedora 8 page and add this option to the InputDevice Section in your xorg.conf, just like this:

	Option		"MultiFingerButton"	"1"

	Option		"MultiFingerButton"	"2"

With the value 1, you get middle-clicking if you click the button while resting two fingers on the mousepad, and right-clicking while resting three fingers.

With the value 2, it reverses, and you get right-clicking if you click while resting two fingers on the mousepad, and middle-clicking while resting three fingers. This is the behaviour in MacOSX.

Try it out, and give your opinion. If you don't like it, you can always revert to the default Fedora package.